Use different anisotropies in a layered sample#

Assign a scattering anisotropy to each material and solve a layered sample with SP3. The values are illustrative, not measured skin properties. SP3 uses the Henyey–Greenstein phase function for each material.

import os
import numpy as np
import MomentRT

ureg = MomentRT.ureg

show_figures = os.environ.get("MOMENTRT_SPHINX_GALLERY") != "1"

Set optical properties for each layer#

Anisotropy belongs to the material, not the solver. SP3 requires a value for every region, including the background. This model assumes the same refractive index across internal interfaces.

dermis = MomentRT.Material(
    absorption=0.03 / ureg.millimeter,
    reduced_scattering=1.0 / ureg.millimeter,
    refractive_index=1.4,
    anisotropy=0.8,
    phase_function=MomentRT.phase_function.HenyeyGreenstein(),
)

epidermis = MomentRT.Material(
    absorption=0.06 / ureg.millimeter,
    reduced_scattering=1.6 / ureg.millimeter,
    refractive_index=1.4,
    anisotropy=0.65,
    phase_function=MomentRT.phase_function.HenyeyGreenstein(),
)

sample = MomentRT.StructuredMedium(
    origin=(-4, -4, 0) * ureg.millimeter,
    size=(8, 8, 4) * ureg.millimeter,
)

sample.add_background(material=dermis)

sample.add_layer(
    name="Epidermis",
    thickness=0.8 * ureg.millimeter,
    material=epidermis,
)

Configure the source, detector, and solver#

The incoming source is diffuse and isotropic over the inward hemisphere. A zero-reflectance Robin face selects the matched-index SP3 boundary model.

source = MomentRT.SurfaceSource.on_face(
    sample=sample,
    face="z_min",
    coordinates=np.array([-1.5, 0]) * ureg.millimeter,
    radius=1.0 * ureg.millimeter,
    wavelength=850 * ureg.nanometer,
    optical_power=1 * ureg.milliwatt,
)

detector = MomentRT.SurfaceDetector.on_face(
    sample=sample,
    face="z_min",
    coordinates=np.array([1.5, 0]) * ureg.millimeter,
    radius=0.8 * ureg.millimeter,
    orientation="outward_normal",
    acceptance_angle=90 * ureg.degree,
)

mesh = MomentRT.CartesianMesh.from_sample(
    sample=sample,
    shape=(15, 15, 11),
)

boundary = MomentRT.RobinBoundary(effective_reflectance=0)

boundaries = MomentRT.Boundaries.uniform(condition=boundary)

solver = MomentRT.SP3(boundaries=boundaries)

simulation = MomentRT.Simulation(
    medium=sample,
    source=source,
    mesh=mesh,
    solver=solver,
    detectors={"contact": detector},
)

Inspect geometry and solve the sample#

Regions have different absorption, reduced scattering, and anisotropy. The displayed surfaces show the geometry used to construct the sample.

report = simulation.validate()

print(report.summary())

if not report.valid:
    raise ValueError("Fix the reported configuration errors before solving.")

system_figure = simulation.plot_system(show=show_figures)

result = simulation.run()

print(f"Dermis anisotropy: {dermis.anisotropy:.2f}")

print(f"Epidermis anisotropy: {epidermis.anisotropy:.2f}")

print(result.summary())
Configuration valid
Warning: Footprint sampling alone does not establish mesh convergence or transport accuracy.
Model note: SP3 is a steady-state simplified P3 angular-moment approximation; it uses each material's normalized phase-function moments through degree 3.
Model note: SP3 assumes isotropic incoming diffuse radiance, requires zero-reflectance Robin conditions on illuminated faces, permits reflecting unilluminated faces, and requires equal internal refractive indices.
Model note: SP3 agreement with a slab reference verifies this implementation for that case, not accuracy for arbitrary geometries or sensors.
Model note: Detector angular acceptance uses a separate Lambertian approximation.
Source sampled area: 3.1020408163265303×10⁻⁶ m²
Detector contact sampled area: 2.01360544217687×10⁻⁶ m²
Dermis anisotropy: 0.80
Epidermis anisotropy: 0.65
Transport result
Model: steady-state tetrahedral SP3 FEM
Wavelength: 850 nm
Mesh shape: (15, 15, 11)
Convergence study: not supplied; convergence is not established.
Detector contact: 5.439695721012772×10⁻⁶ W (sampled area 2.01360544217687×10⁻⁶ m²; geometric area 2.0106192982974678 mm²)
Source sampled area: 3.1020408163265303×10⁻⁶ m²; geometric area: 3.141592653589793×10⁻⁶ m²
Incoming power: 1 mW
Absorbed power: 0.00019123440812157216 W
Escaping power: 0.0008087655918784266 W
Residual power: 1.3010426069826053×10⁻¹⁸ W
Linear relative residual: 1.68e-15
Warning: minimum fluence is negative: -0.0937768318898355 W/m²

View the physical fluence in three dimensions#

The source and detector are overlaid on the solved fluence volume. Refine the mesh to assess both footprint sampling and the detector signal; SP3 is an approximation and this plot does not establish transport accuracy.

fluence_figure = result.fluence.plot(
    view="volume",
    scale="linear",
    overlays=[source, detector],
    show=show_figures,
)

Inspect the modeled geometry#

This view shows the configured geometry and instrument footprints.

gallery_system_figure = simulation.plot_system(show=False)

Total running time of the script: (0 minutes 0.379 seconds)

Gallery generated by Sphinx-Gallery